Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Remove the crankshaft balancer bolt.
7. Remove the crankshaft balancer.
8. If required, clean and inspect the crankshaft balancer.
Installation Procedure
1. Lubricate the crankshaft balancer internal hub with clean engine oil.
2. Install the crankshaft balancer on the crankshaft.
3. Lubricate the crankshaft balancer bolt with clean engine oil.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the crankshaft balancer bolt and washer.
Tighten the bolt to 100 Nm (74 ft. lbs.) + 105 degrees.
