Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
7. Install the PCV hose/pipe.
8. Position the fuel filter with bracket to the rocker cover.
9. Install the fuel filter bracket bolts.
Tighten the bolts to 21 Nm (15 ft. lbs.).
10. Position the heater outlet hose.
11. Install the heater hose bracket bolt to the bracket.
Tighten the bolt to 21 Nm (15 ft. lbs.).
12. Install the EGR cooler tube.
13. Install the fuel injection control module.
14. Important: Lubricate the end of the duct prior to installation.
Install the charged air cooler outlet duct to the intake.
15. Tighten the charged air cooler outlet duct to intake hose clamp.
Tighten the clamp to 6 Nm (53 inch lbs.).
16. Install the air cleaner outlet duct.
