Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
7. Install the battery cable junction block and bolt (1).
Tighten the bolt to 9 Nm (80 inch lbs.).
8. Position the A/C compressor.
9. Install the A/C compressor bolts.
Tighten the bolts to 50 Nm (37 ft. lbs.).
10. Connect the A/C cut out switch electrical connector.
11. Connect the A/C clutch electrical connector.
12. Install the drive belt.
13. Connect the negative battery cable.
