Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Oil Pan: Service and Repair
Upper
Oil Pan Replacement - Upper
^
Tools Required
-
J 37228 Seal Cutter
Removal Procedure
1. Remove the oil level indicator.
2. Remove the oil level indicator tube bolt from the fuel injection control module bracket.
3. If vehicle is a 4-wheel drive (4WD), remove the front differential carrier.
4. If vehicle is a 2-wheel drive (2WD), disconnect the relay rod from the pitman arm and idler arm.
5. Remove the lower oil pan.
6. Remove the engine flywheel.
7. Remove the battery cable bracket bolts.
