Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Intake Manifold: Service and Repair
Intake Manifold Replacement - Center
Intake Manifold Replacement - Center
Removal Procedure
1. Remove the Exhaust Gas Recirculation (EGR) valve cooler tube.
2. Remove the intake manifold tube.
3. Remove and discard the 2 intake manifold tube gaskets.
4. Remove the turbocharger.
5. Remove the center intake manifold bolts/nuts.
6. Pull-up the center intake manifold in order to remove.
7. Remove and discard the gaskets.
8. Clean the center intake manifold in cleaning solvent and air dry.
