Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Position the exhaust pipe with a NEW gasket to the turbocharger. Align the tab on the gasket at the turbocharger to face inward.
2. Loosely install the bolts.
3. Position the exhaust pipe with a NEW gasket to the exhaust manifold. Align the tab on the gasket to face outward.
4. Loosely install the bolts.
5. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the exhaust pipe bolts in the sequence shown.
Tighten the bolts to 53 Nm (39 ft. lbs.).
