Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
6. Install the center console.
7. Install the floor air outlet duct extension (1) to the floor air duct (2).
Mode Actuator(Without RPO Code D07)
MODE ACTUATOR REPLACEMENT (W/O D07)
REMOVAL PROCEDURE
1. Remove the floor air outlet duct extension (1) from the floor duct (2).
2. Remove the Body Control Module.
3. Disconnect the electrical connection at the mode actuator (10).