Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Parking Lamp: Service and Repair
PARK/TURN SIGNAL LAMP REPLACEMENT (OLD STYLE)
REMOVAL PROCEDURE
1. Ensure the headlamp switch is in the OFF position.
2. Remove the headlamp.
3. Remove the park/turn signal lamp assembly by pushing on the inboard retainer clip.
4. Disconnect the electrical connector from the assembly.
INSTALLATION PROCEDURE
1. Install the electrical connector to the park/turn signal lamp assembly.
2. Install the lamp assembly.
3. Install the headlamp.
