Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Glove Box Lamp Switch: Service and Repair
INSTRUMENT PANEL (I/P) COMPARTMENT LAMP SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Lower the instrument panel storage compartment door by pressing in the tab.
2. With one hand holding the plunger of the switch, use a small screw driver to push in the tabs on each side while pulling outwards.
3. Pull the switch assembly from the I/P.
4. Disconnect the electrical connector.
5. Remove the bulb (1).
INSTALLATION PROCEDURE
