Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Turn Signal Flasher: Service and Repair
HAZARD AND TURN SIGNAL FLASHER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the knee bolster.
2. On the back side of the fuse block release the retainer while pulling the flasher (1) outwards.
3. Remove the flasher (1) from the fuse block.
INSTALLATION PROCEDURE
1. Install the flasher (1) to the fuse block until the retainer clicks into place.
2. Install the knee bolster.
