Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Radiator Hose: Service and Repair
Inlet
Radiator Hose Replacement - Inlet (6.6L Engine)
Removal Procedure
1. Drain the engine coolant.
2. Move the hose clamps back on the radiator inlet hose.
3. Remove the radiator inlet hose from the radiator.
4. Remove the radiator inlet hose from the water outlet tube.
Installation Procedure
1. Install the radiator inlet hose to the water outlet tube.
2. Install the radiator inlet hose to the radiator.
3. Install the hose clamps on the radiator outlet hose.
4. Fill the engine coolant.
