Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Install the fuel pressure sensor (1).
Tighten
Tighten the sensor to 70 N.m (52 lb ft).
2. Connect the fuel rail pressure sensor electrical connector.
3. Install the EGR cooler tube.
4. Install the air cleaner outlet duct.
5. Prime the fuel system. Refer to Fuel System Priming.
6. Start the engine. If the engine stalls, repeat the above step.
7. Once the engine starts, inspect for fuel leaks.
