Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Tighten the fuel injector harness bracket bolt to 10 N.m (89 lb in).
14.
Install the cylinder number 2 glow plug harness connector and nut.
Tighten
Tighten the glow plug harness connector nut to 2 N.m (18 lb in).
15.
Connect the cylinder number 2 and cylinder number 4 fuel injector harness connectors.
16.
Install the left charge air cooler inlet pipe. Refer to Service Information (SI) for the Charged Air Cooler Hoses/Pipes Replacement (Left).
17.
Install the left wheelhouse panel. Refer to Service Information (SI) for the Wheelhouse Panel Replacement.
Repair Procedure for Right Bank Cylinder Number 7