Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
6. Disconnect the fuel hoses (2, 3) from the injection pump as required.
7. Remove the fuel hoses from the vehicle as required.
REMOVAL PROCEDURE
1. Install the fuel hoses to the vehicle as required.
2. Connect the fuel hoses (2, 3) to the injection pump as required.
3. Position the fuel hose clamps (1) at the injection pump as required.
4. Connect the fuel hoses to the return/feed line as required.
5. Position the fuel hose clamps (1) at the return/feed line as required.
6. Install the air intake tube.