Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
5. Install the fuel return line hoses to the return line.
6. Position the fuel return line hose clamps (1).
7. Install the EGR cooler tube.
8. Install the water outlet.
9. Install the engine wiring harness.
10. Prime the fuel system. Refer to Fuel System Priming.
11. Start the engine. If the engine stalls, repeat the above step.
12. Once the engine starts, inspect for fuel leaks.
Fuel Return Hose Replace - Fuel Return to Fuel Injection Pump
FUEL RETURN HOSE REPLACEMENT - FUEL RETURN PIPE TO FUEL INJECTION PUMP
REMOVAL PROCEDURE
1. Remove the water outlet.
2. Remove the air intake tube.
3. Reposition the fuel hose clamps (1) at the return/feed line as required.
