Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
4. Connect the fuel hoses to the return/feed line as required.
5. Position the fuel hose clamps (1) at the return/feed line as required.
6. Install the air intake tube.
7. Install the water outlet
8. Prime the fuel system. Refer to Fuel System Priming.
9. Start the engine. If the engine stalls, repeat the above step.
10. Once the engine starts, inspect for fuel leaks.
Fuel Injector Return Pipe Replacement -Left
FUEL INJECTOR RETURN PIPE REPLACEMENT -LEFT
REMOVAL PROCEDURE
1. Remove the glow plug controller.