Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Remove the engine wiring harness.
2. Remove the water outlet.
3. Remove the exhaust gas recirculation (EGR) cooler tube.
4. Disconnect the right fuel rail feed pipe fittings (1, 3).
5. Remove the fuel rail pipe clamp bolts (2).
6. Remove the right fuel rail feed pipe.
REMOVAL PROCEDURE
1. Install the right fuel rail feed pipe.
NOTE: Refer to Fastener Notice in Service Precautions.