Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
2. Connect the left fuel rail feed pipe fittings (1).
Tighten
Tighten the fittings to 41 N.m (30 lb ft).
3. Install the hose (3) to the return line and injection pump.
4. Position the return line hose clamps at the return line and injection pump.
5. Install the water outlet.
6. Prime the fuel system. Refer to Fuel System Priming.
7. Start the engine. If the engine stalls, repeat the above step.
8. Once the engine starts, inspect for fuel leaks.
Fuel Injector Feed Pipes Replacement - Right
FUEL INJECTOR FEED PIPES REPLACEMENT - RIGHT
REMOVAL PROCEDURE
