Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Clockspring Assembly / Spiral Cable: Service and Repair
INFLATABLE RESTRAINT STEERING WHEEL MODULE COIL REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to SIR Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3.
2. Remove the steering column trim covers.
3. Remove the wire harness assembly (4) from the wire harness strap (5).
4. Remove the 2 wire harness straps (3) from the wire harness assembly.
5. Remove the wire harness strap (2) from the upper tilt head assembly (1).
6. Remove the retaining ring (1).
7. Remove the SIR coil (2).
8. Remove the wave washer (3) from the steering column upper shaft.
INSTALLATION PROCEDURE
