Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Negative: Service and Repair
Replacement Procedure - Auxiliary
BATTERY NEGATIVE CABLE REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the auxiliary battery negative cable (2).
2. Unsnap the positive battery cable cap.
3. Disconnect the positive battery cable (1).
4. Remove the auxiliary battery cable clip from the fender wheelhouse inner panel.
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
6. Remove the cable clip bolt (5) at the frame.
7. Remove the auxiliary battery negative cable bolt (4).
8. Remove the battery cable retainer nut (6) and the retainer.
9. Remove the battery positive cable from the retainer.
10. Remove the positive battery cable nut (7).
11. Remove the positive battery cable lead (8) from the starter.
12. Remove the auxiliary battery cable.
INSTALLATION PROCEDURE