Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Alternator: Service and Repair
Generator Replacement
GENERATOR REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Disconnect the generator electrical connector (1).
3. Remove the drive belt.
4. Remove the positive battery cable from the generator, perform the following:
4.1.
Slide the boot (3) down to access the terminal stud.
4.2.
Remove the positive cable nut (2).
4.3.
Remove the positive cable.
