Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. If equipped with a 8.1L engine, install the starter heat shield.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the starter heat shield bolts, and nut.
Tighten
-
Tighten the bolts to 3 N.m (35 lb in).
-
Tighten the nut to 5 N.m (44 lb in).
1. If equipped with a 4.8L, 5.3L, or 6.0L engine, install the starter heat shield.
2. Install the starter motor.
