Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Alignment: Service and Repair
Front Wheel Alignment
Front Caster and Camber Adjustment
Front Caster and Camber Adjustment
1. Important:
Caster measurements or valves must be compensated for the measured frame angle.
Caster is relative to frame, the caster values must be compensated for the measured frame angle by using a digital protractor or equivalent on a flat
portion of the frame in front of the rear tire.
2. Frame angle is positive when higher in the rear. Measure both sides of the frame and take an average from those measurements. Then add the
average frame angle to the caster reading when making adjustments.
3. Frame angle is negative when lower in the rear. Measure both sides of the frame and take an average from the measurements. Then subtract the
