Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Important:
Make sure the shock dampener is on the rack before installing the inner tie rod.
The threads must be clean prior to the Loctite® application. Check the Loctite®, or equivalent, container for expiration date. Use only enough
Loctite® to evenly coat the threads.
Apply Loctite® 262, or equivalent, to the inner tie rod threads (2).
2. Install the inner tie rod (3) to the rack and pinion (1).
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install a torque wrench (5) to the J 34028 to tighten the inner tie rod (6).Hold the rack while tightening the tie rod as shown.
^
Tighten the inner tie rod to 100 Nm (74 ft. lbs.).
