Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
12. Inspect the TCC solenoid and wiring harness for the following defects:
^
Damage
^
Cracked connectors
^
Exposed wires
^
Loose pins
Installation Procedure
1. Install the wiring harness and TCC solenoid with a new O-ring seal to the transmission.
2. Install the pass-through electrical connector to the transmission case.
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the valve body bolts which retain the internal wiring harness and install the TCC solenoid bolts.
^
Tighten the control valve body bolts to 11 Nm (97 inch lbs.).
^
Tighten the TCC solenoid bolts to 11 Nm (97 inch lbs.).
