Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
If no issues were found after the above inspections, install a 2006 air cleaner system using the following procedure.
Disconnect the mass air flow sensor electrical connector and remove the sensor from the air outlet duct.
Loosen the clamps and remove the air cleaner outlet duct.
Remove the air cleaner assembly. Grasp the air filter assembly and pull up on the assembly in order to disengage the retaining pins from the grommets.
Remove the five 10 mm bolts and the tray.
Remove the insulation on the inner right fender.
With the wheel turned to the right, measure from the corner of the wheel liner over 231 mm (9 in) and up 45 mm (1.8 in) as seen in the illustration above.
