Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
Torque Converter: Service and Repair
Torque Converter Replacement
^
Tools Required
-
J 21366 Converter Holding Strap
-
J 46409Torque Converter Lifting Handles
-
J 44723 Transmission/Stand Adaptor Plate
Removal Procedure
1. Remove the transmission from the vehicle.
2. Install J 21366 to restrain the torque converter.
3. Install J 44723.
4. Position the transmission vertically with the torque converter end up.
5. Remove J 21366 torque converter retaining bracket.
6. Important:
The distance from the torque converter mounting lugs to the transmission mounting face is an important measurement. It is required to check
correct reassembly of the torque converter.
Measure from the mounting lugs to the transmission mounting face.
7. Install J 46409 Torque Converter Lifting Handles 180 degrees apart into two lugs on the front of the torque converter.
8. Caution:
Avoid personal injury or property damage when removing or installing the torque converter by seeking an assistant to help lift the torque
converter.
Lift the torque converter free of the transmission and place it on the work table.
