Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
1. Install the 8 checkballs (9 for some models) into the transmission case passages.
^
The checkball marked as number 2, is used on RCP, RDP, ZJP and ZLP models only
^
To hold the checkballs in place, use the J 36850.
2. Install the PWM screen into the valve body.
3. Install a new manual 2-1 band servo piston seal (2) onto the manual 2-1 band servo piston (3).
4. Install the manual 2-1 band servo piston pin (1) into the manual 2-1 band servo piston (3).
5. Install the manual 2-1 band servo piston pin retainer ring (4).
6. Install the manual 2-1 band servo piston cushion spring (2).
7. Important:
Make certain that the tapered end of the manual 2-1 band servo piston pin contacts the manual 2-1 band.
Install the manual 2-1 band servo piston (1).
