Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Install the manual valve (1) into the valve body.
9. To aid in alignment and assembly, install J 25025-5.
10. Install the valve body gasket (6).
11. Install the valve body (5). Attach the manual valve to the detent lever while installing the valve body.
12. Install the transmission fluid pressure manual valve position switch (2).
13. Install the transmission fluid pressure manual valve position switch bolts (1) finger tight.
14. Tighten the bolts in the order shown.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
15. Remove J 25025-5.
