Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
2. Align control valve assembly (1) with the dowel pins (2) in the main housing. Seat the control valve assembly against the main housing and hold it
in position.
3. Install one bolt marked (1) to hold the control valve assembly in place.
4. Notice:
Refer to Fastener Notice in Service Precautions.
Reinstall the remaining 10 bolts marked (1) and 4 bolts marked (2) that fasten the control valve assembly to the main housing.
^
Tighten the bolts to 12 Nm (108 inch lbs.).