Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Rotate the clutch master cylinder 45 degrees clockwise to the unlocked position.
Important: Complete removal of the clutch master cylinder is not required.
9. Pull the clutch master cylinder out until the pushrod socket is not touching the clutch pedal.
10. Remove the clutch pedal to clutch pedal bracket bolt.
11. Remove the clutch pedal to brake module bolts.
12. Remove the clutch pedal sub-assembly.
Installation Procedure
1. Install the clutch pedal sub-assembly.
