Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
7. Important:
When removing the axle shaft do not rotate the shaft. Rotating the shaft will cause the gears to move. Misalignment of the gears will make the
assembly difficult.
Remove the axle shaft.
Installation Procedure
1. Install the axle shaft.
2. Install the spring loaded lock clip to the axle shaft end.
3. Install the steering knuckle assembly.
4. Install the rear steering gear assembly.
5. Install the tire and wheel assembly.
6. Lower the vehicle.
