Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
14. Remove the retaining ring from the wheel hub.
15. Remove the outer hub bearing and bearing cup using the J 24426 (2) and the J 8092 (1).
Installation Procedure
1. Lubricate the following with a light coat of high melting point EP bearing lubricant:
^
The outer wheel bearing
^
The inner wheel bearing
^
The outer wheel bearing cup
^
The inner wheel bearing cup
^
The axle housing
2. Install the outer bearing into the wheel hub.
3. Install the outer bearing cup into the wheel hub.
