Silverado 3500 2WD V8-6.6L DSL Turbo VIN 2 (2004)
8. Install the inner bearing.
9. Important:
Each time you replace the wheel hub bearings, install a new oil seal in order to prevent the wheel hub from leaking.
Install the new oil seal using the J 44420 (2) and the J 8092 (1).
10. Install the rotor, if necessary.
11. Apply a light coat of high melting point EP bearing lubricant to the axle housing spindle.
12. Install the wheel hub to the axle housing.
13. Install the adjusting nut to the hub using the J 2222-C.
14. Adjust the wheel bearings.
15. Install the axle shaft.
16. Install the brake caliper.
17. Install the tire and wheel assembly.
