Silverado 3500 2WD V8-8.1L VIN G (2005)
Tailgate Shock / Support: Service and Repair
Support Cable Anchor Bolt Replacement - Endgate
Support Cable Anchor Bolt Replacement - Endgate
Removal Procedure
1. Lower the endgate.
2. Remove the cable from the Anchor Bolt.
3. Remove the Anchor Bolt.
Installation Procedure
Notice: Refer to in Fastener Notice Service Precautions.
1. Install the Anchor Bolt.
Tighten the bolt to 25 N.m(18 lb ft)
