Silverado 3500 2WD V8-8.1L VIN G (2005)
Tailgate Shock / Support: Service and Repair
Support Cable Replacement - Endgate
Support Cable Replacement - Endgate
Removal Procedure
1. Lower the end gate.
2. Remove the end gate support cable on each side from the cable restrain bolt.
3. Remove the retainer from the end gate striker.
4. Remove the end gate support cable from the end gate.
Installation Procedure
1. Install the end gate support cable onto the end gate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the latch fastener.
Tighten the latch fasteners to 25 N.m (18 lb ft).
