Silverado 3500 2WD V8-8.1L VIN G (2005)
1. Install the balancer onto the end of the crankshaft.
2. Install J42845 to the crankshaft balancer.
Important: Apply the lubricant that comes with J42845 each time the tool is used. Failure to lubricate the J42845 may prevent the balancer from
installing completely.
3. Using J42845 install the balancer.
4. Tighten the J42845 until the crankshaft balancer is completely seated against the crankshaft sprocket.
5. Remove the J42845 from the crankshaft.
