Silverado 3500 2WD V8-8.1L VIN G (2005)
4. Install the spark plug wires to the ignition coils.
5. Connect the ECT sensor electrical connector (3).
6. Connect the ignition coil harness electrical connector (2).
7. Install the CPA retainer to the ignition coil electrical connector (2).
8. Install the air cleaner outlet duct.
9. Tighten the clamps at the throttle body and air cleaner.
Tighten the clamps to 4 Nm (35 inch lbs.).
10. Install the engine sight shield.
