Silverado 3500 2WD V8-8.1L VIN G (2005)
Intake Manifold: Specifications
Tighten the intake manifold bolts in the sequence shown, using four passes.
Tighten the bolts a first pass ............................................................................................................................................................... 5 Nm (44 inch lbs.)
Tighten the bolts a second pass .......................................................................................................................................................... 8 Nm (71 inch lbs.)
Tighten the bolts a third pass .......................................................................................................................................................... 12 Nm (106 inch lbs.)
Tighten the bolts a final pass ............................................................................................................................................................... 15 Nm (11 ft. lbs.)
Throttle Body Nut ................................................................................................................................................................................. 10 Nm (89 inch lbs.)
Throttle Body Stud .............................................................................................................................................................................. 12 Nm (106 inch lbs.)
