Silverado 3500 2WD V8-8.1L VIN G (2005)
14. Install the wheel hub to the axle housing.
15. Install the adjusting nut to the hub using the J 2222-C.
16. Adjust the wheel bearings. Refer to Wheel Bearing Adjustment, See: Adjustments
17. Install the axle shaft, See: Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Axle Shaft/Service and Repair
18. Install the brake caliper bracket, See: Brakes and Traction Control/Disc Brake System/Brake Caliper/Service and Repair
19. Install the tire and wheel assembly, See: Service and Repair
20. Inspect and add axle lubricant to the axle housing, if necessary, See: Fluids/Fluid - Differential/Service and Repair
21. Lower the vehicle.
