Silverado 3500 4WD V8-6.0L (2007)
2. Align the inflatable restraint steering wheel module coil (1) with the horn tower on the turn signal switch cancel cam (2).
3. Slide the inflatable restraint steering wheel module coil (4) onto the steering shaft (2).
4. Firmly seat the new inflatable restraint steering wheel module coil retaining ring (3) into the appropriate groove on the steering shaft (2).
5. Remove and discard the centering tab from the new inflatable restraint steering wheel module coil (4).
6. Connect any electrical connectors as needed.
7. Install the steering column shroud.
8. Install the steering wheel.
9. Remove anti-rotation pin J 42640.