chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15439 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15437

Silverado 3500 4WD V8-6.0L (2007)

Page 7
background image

Note: Drive the outer bearing cup into the wheel hub until it is just past the retaining ring groove. Do not bottom out the bearing assembly in the
bore.

7. Using the J 44419 installer (2) and the J 8092 handle (1), install the outer bearing cup into the rear axle hub.

Note: Ensure that the retaining ring is fully and evenly seated in the groove.

8. Install the retaining ring into the groove.

Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15439 > < Rear Axle Shaft Seal and/or Bearing Replacement (w/Rear Disc)|Page 15437