Silverado 3500 4WD V8-6.0L VIN U (2004)
8. If equipped with 4WD, install the fuel line clip to the bracket on the transfer case.
9. Install the fuel line clips to the brackets on the transmission.
10. Install the fuel pipe bracket to the bellhousing stud.
11. Install the fuel pipe bracket nut.
Tighten
Tighten the nut to 10 N.m (89 lb in).
12. Lower the vehicle.
13. Remove the caps from the fuel rail.
14. Connect the EVAP canister purge tube line (2).
15. Connect the fuel feed line (1) at the engine.
16. Install the fuel fill cap.
