Silverado 3500 4WD V8-6.0L VIN U (2004)
1. Install the fuel and EVAP bundle.
NOTE: Refer to Fastener Notice in Service Precautions.
2. If vehicle is a extended cab, install the fuel and EVAP bundle nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
3. If vehicle is a regular cab, install the fuel and EVAP bundle nuts.
Tighten
Tighten the nuts to 12 N.m (106 lb in).
4. Connect the quick connect fittings to the EVAP canister.
5. Install the EVAP line to the clips (2) on the fuel tank.