Silverado 3500 4WD V8-6.0L VIN U (2004)
5. Important:
When installing bolts throughout this procedure, be sure to use the correct bolt size and length in the correct location as specified.
Do not install the transmission fluid indicator stop bracket and bolt at this time.Install but do not tighten the valve body bolts which retain only the
valve body directly. Each numbered bolt location corresponds to a specific bolt size and length, as indicated by the following:
^
M6 X 1.0 X 65.0 (1)
^
M6 X 1.0 X 54.4 (2)
^
M6 X 1.0 X 47.5 (3)
^
M6 X 1.0 X 35.0 (4)
^
M8 X 1.0 X 20.0 (5)
^
M6 X 1.0 X 12.0 (6)
^
M6 X 1.0 X 18.0 (7)
6. Install the manual detent spring.
7. Install but do not tighten the manual detent spring bolt.
8. Install the transmission fluid pressure switch.
9. Install but do not tighten the valve body bolts which retain the transmission fluid pressure switch to the valve body.
