Silverado 3500 4WD V8-6.6L DSL Turbo (2010)
3. Install the discharge hose to the condenser using new sealing washers.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. Install the NEW discharge hose nut to the condenser.
Tighten the nut to 16 Nm (12 lb ft).
5. Install the upper radiator air baffle. Refer to Radiator Air Upper Baffle and Deflector Replacement (See: Engine, Cooling and Exhaust/Cooling
System/Radiator/Service and Repair/Removal and Replacement/Radiator Air Upper Baffle and Deflector Replacement).
6. Install the discharge hose (5) to the compressor using new sealing washers.
7. Install the NEW discharge hose mounting bolt (2) to the A/C compressor.
Tighten the bolt to 16 Nm (12 lb ft).
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging (Non-HP2) (See: Refrigerant/Service and Repair
)Refrigerant Recovery and Recharging (HP2) (See: Service and Repair).
9. Leak test the fittings of the component using the J 39400-A .
