Silverado 3500 4WD V8-6.6L DSL Turbo (2010)
4. Remove the CKP sensor bolt.
5. Remove the CKP sensor.
6. If necessary, remove the CKP sensor spacer bolts.
7. If necessary, remove the CKP sensor spacer.
Installation Procedure
1. If necessary, lubricate a NEW CKP spacer O-ring with clean engine oil.
2. If necessary, install the NEW O-ring to the CKP sensor spacer.
Note: The crankshaft position sensor spacers are machined with different timing positions. However, if the crankshaft position sensor spacer
requires replacement, replace with a grade "C" spacer.
3. If necessary, install the CKP sensor spacer.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
4. If necessary, install the CKP sensor spacer bolts.