chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Body - Replacement Fender Hood Hinge Hole Too Large|Page 9044 > < Body - Replacement Fender Hood Hinge Hole Too Large|Page 9042

Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)

Page 3
background image

5. Notice:  

Refer to Fastener Notice in Service Precautions.
Install the WSS mounting bolt.
^

Tighten the WSS mounting bolt to 18 Nm (13 ft. lbs.).

6. Install the WSS cable mounting clip to the knuckle.
7. Install the WSS cable mounting clip to the upper control arm.
8. Install the WSS cable mounting clip to the frame attachment point.
9. Connect the WSS cable electrical connector.

Body - Replacement Fender Hood Hinge Hole Too Large|Page 9044 > < Body - Replacement Fender Hood Hinge Hole Too Large|Page 9042