Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Trim Panel: Service and Repair
Garnish Molding Replacement - Windshield Pillar
Garnish Molding Replacement - Windshield Pillar
Removal Procedure
1. Pull the molding straight out in order to release the retainers.
2. Remove the windshield garnish molding.
Installation Procedure
1. Ensure the bottom of the molding is seated in the slots on the I/P.
2. Align the molding retainers to the slots.
3. Press the moldings straight in till fully seated.
