Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
Coolant Line/Hose: Service and Repair
Turbocharger Coolant Hoses/Pipes Replacement
Engine - Inlet Pipe
Turbocharger Coolant Hoses/Pipes Replacement (6.6L (LLY) Engine - Inlet Pipe)
Removal Procedure
1. Remove the intake manifold cover.
2. Drain the cooling system.
3. Important: After removing the charged air cooler duct, cover the turbocharger opening with tape in order to prevent entry of objects.
Loosen the charged air cooler inlet duct connector to turbocharger clamp (1).
Important: Do not use a screwdriver or other tool to pry the hose loose. The hose can be torn or damaged. Loosen the hose by twisting.
4. Remove the charged air cooler inlet duct connector (4) from the turbocharger.
